Drayton Freestanding Claw Foot Slipper Bath
Drayton Freestanding Claw Foot Slipper Bath
Share
Shipping & Returns
Shipping & Returns
We aim to ship all orders received before midday (Monday – Friday) within 48 hours.
Colour baths and basins are made to order, so please allow up to 6 weeks for delivery. Victoria + Albert Baths define “gloss” at a 90% gloss level, and “matt” at a 20% gloss level.
Orders over £1,000 qualify for free delivery. For orders under £1,000, a £20 delivery charge will apply.
Orders can only be fulfilled to Mainland U.K. addresses.
QUARRYCAST™ products are guaranteed for residential use for a period of 25 years. 25 year guarantee is the ultimate reassurance that our baths and basins are made to last.
QUARRYCAST™ products are guaranteed for commercial and business use for a period of 8 years.
PAINT FINISH EXTERIOR 2 YEAR GUARANTEE
The paint finish exterior is guaranteed for a period of 2 years.
Dimensions & Specifications
Dimensions & Specifications
NOTE | Tap holes cannot be drilled for this product.
Height | 850 mm
Width | 842 mm
Length | 1685 mm
Depth | 500 mm
Capacity | 197L
Materials
Materials
QUARRYCAST™ White (Gloss)
QUARRYCASTTM is a solid material that is more than twice as hard as acrylic and does not creak or flex.
Care Instructions
Care Instructions
QUARRYCASTTM WHITE (GLOSS) BATHS AND BASINS
We recommend rinsing the bath or basin for light daily use with plenty of warm, soapy water. QUARRYCASTTM has excellent stain resistance, but we recommend that bath or basin water containing additives (oils, bath salts, dyes etc.) is always drained. Then the bath or basin is cleaned with fresh, warm water immediately after use. If this method does not remove any marks, we recommend a mild, non-abrasive household cleaner. Should you need to clean the bath or basin with an abrasive cleaner, as may be required after heavy use or for any stubborn staining, we recommend using an automotive-grade polish. Please note abrasives will cause the disappearance of the glossy look over a long period. Bleach-based cleaning products are compatible with QUARRYCASTTM, although, for environmental reasons, we do not recommend them. Always rinse any cleaning products off the bath or basin with fresh, clean water.
100% MATT BATHS AND BASINS
We recommend cleaning our 100% Matt products with warm, soapy water, per the advice for QUARRYCASTTM White (Gloss) products. All cleaning products should be fully rinsed with fresh, clean water afterwards. For any stubborn staining on products with a 100% Matt finish, we recommend using a fine scouring pad, such as the 3MTM Scotch-BriteTM Hand Pad.
PAINTED BATHS AND BASINS
For painted baths and basins, we recommend following the essential cleaning advice for QUARRYCASTTM White (Gloss) and 100% Matt products for internal use, in addition to the below:
Painted products with a gloss finish can be cleaned with neutral soaps and warm water. Anything more stubborn can be polished with a Polishing Kit, which is available from customer services. Painted products with a matt finish should not be polished and can be cleaned with a specialist matt finish cleaner such as Flitz. Specialist matt finish cleaners will help ensure the finish remains matt. We recommend obtaining a specialist matt or gloss cleaner from an automotive store for stubborn staining. Please follow the instructions on the packaging and ensure the cleaning is not under hard pressure, as this can remove the matt finish.
CHROME, NICKEL, BRASS, BRONZE AND STAINLESS STEEL
We recommend Chrome, Nickel, Brass, Bronze and Stainless Steel products are dried after each use with a soft cloth to reduce any marks from standing water that may contain impurities. Any residues from cosmetic products, aggressive cleaning products and similar should be immediately rinsed away with clean water. Clean with neutral soap and warm water using a microfibre cloth. A 50/50 solution of lemon juice and water is recommended to remove limescale. Apply to cotton wool and wrap on the area for a maximum of 60 minutes, and then rinse clean with clean water, repeat as required. For Stainless Steel products, stubborn marks can be removed with a soft cloth and specialist stainless steel cleaner. Do not use harsh cleaning chemicals containing acids, alkaline, caustics or grits. Bleaches, alcohol and vinegar-based cleaners should be avoided. Do not use abrasive cloths, scouring pads, scrub sponges, steel wool etc., as these can scratch the product's surface and promote deterioration of the finish.
REPAIR AND MAINTENANCE
QUARRYCASTTM is scratch resistant. However, if any scratches do occur in extreme conditions, such as installation, these can be removed with the correct treatment.
For QUARRYCASTTM White (Gloss) products, light scratches that cannot be felt with a fingernail may be removed by polishing with a fine-cut automotive compound. If they remain, try rubbing with a fine (2000 grit) waterproof abrasive paper on a sanding block with water. Re-polish the surface afterwards using a fine-cut automotive rubbing compound from reputable or professional auto paint supply stores. Limit sanding to the smallest possible area around the scratch for best results. Deep scratches that can be felt with a fingernail will require a more specific repair, and we recommend you contact customer services to be talked through the steps.
For 100% Matt products, any light scratches that cannot be felt with a fingernail may be removed by rubbing in a circular motion with a scouring pad using light pressure. If they remain, try rubbing with a fine (1500-2000 grit) waterproof abrasive paper on a sanding block with water. For deeper scratches, please get in touch with customer services. Hello@bildenhome.com
The Drayton Freestanding Claw Foot Slipper Bath perfectly combines Victorian elegance and modern detailing. The slipper bath silhouette and claw foot base provide a timeless, elegant aesthetic, while the shoulder support offers unparalleled comfort during a relaxing soak. The discerning waste is visible, presenting the sophisticated design elements used to create the slipper bathtub. Enjoy a sublime bathing experience with this classic slipper bath.
Victoria + Albert Baths are crafted from a patented technology QUARRYCAST™ material that provides an inherently superior bath. The QUARRYCAST™ material was developed using a proprietary blend of Volcanic Limestone™ and high-performance resins. The result is a world-class stone composite with unparalleled strength, durability, and beauty.
The naturally white, glossy surface is incredibly durable and resistant to hair dyes and bath oils. QUARRYCAST™ is a solid material that is more than twice as hard as acrylic and does not creak or flex. QUARRYCAST™ is warm to the touch and has outstanding insulating properties, keeping your bath water warmer for longer. The naturally glossy surface is easy to wipe clean.
We can create our bathtubs in bespoke colours to match any RAL. Feel free to request a consultation by reaching out to hello@bildenhome.com
We offer a selection of push control or plug and chain waste kits available in brushed nickel, polished nickel, polished brass and polished chrome.
What our customers say about us…
-
“Exceptional company to deal with. Excellent product & matched by exceptional customer service. Highly recommended”. Alan Hepburn
-
“A very quick turnaround from initial order to receiving the item. I also got good support about the radiator from a phone enquiry I made. Thank you”. Maggie Black
-
“Great products and the customer service was brilliant, thanks very much, will definitely shop here again”. Mick Lancastle-Smith